Fenders are an integral part of safety system of the ship which reduces the shocks upon the quay or the hull. A wide range or variety of marine fenders is available in the market for different applications. They are not only used for merchant vessels, but also for boats, yachts, and other floating v

Anchoring is an important aspect for the vessel,Mooring anchor is used to enable the ship to halt effectively whenever required in the port or harbours and even in the middle of the ocean or the sea.There are many different types mooring anchors in the market.1) Conventional type: This mooring ancho

Since the fast rescue boat has highlighted the word "fast" throughout the rescue operation, it is necessary to observe the operating procedures during the whole operation to prevent accidents. Pay special attention to the following issues:1. The passengers must not stand before the single lifting po

1) Housing. The housing is designed to be installed on the embarkation deck of low freeboard vessels and is ideal for those vessels with a limited embarkation deck area. The housing is fabricated from aluminium which is then powder coated for additional corrosion resistance. The housing rests in its

1、Cleaning and Drying(1)Lifejacket should be cleaned if dirt found.Lay the lifejacket flat on an clean work table.(2)Scour off dirt by soft brush or soft cloth soaking with mild detergent,and then rinse it.(3)After washing,hang to dry using a soft,round edge hanger in a dry and well ventilated place

Marine evacuation system (MES) is a very unique evacuation arrangement which allows the people on ships to get into the positioned Life raft during time of emergencies. The most important advantage of having a marine evacuation system on a ship is that the people can get into the Liferaft without ge

1) Rinse in fresh warm water with a mild detergent only after use. 2) Don’t machine wash, dry clean and use stain removers. 3) Drip dry away from direct heat. Store in dry conditions at 0℃～+35℃, and relative humidity of 85% or less and should not be compressed. 4) The CO2 content and jacket shall be

Mistakes that are easy to make when operating CO2 Fire Fighting Systems

Precautions for storage and maintenance1. Store this product in a low-temperature, ventilated and dry environment. It is strictly forbidden to put it in a high-temperature environment or long-term exposure; avoid contact with corrosive chemicals such as acid, alkali, salt, etc.; strictly forbid heav